Hioki 8835-01 - Notes on Use

v
────────────────────────────────────────────────────
Notes on Use
────────────────────────────────────────────────────
WARNIN
G
Do not use the product where it may be exposed to corrosive or
combustible gases. The product may be damaged or cause an explosion.
CAUTIO
N
・This product should be installed and operated indoors only, between 5 and
40℃ and 35 to 80% RH.
・Do not store or use the product where it could be exposed to direct sunlight,
high temperature or humidity, or condensation. Under such conditions, the
product may be damaged and insulation may deteriorate so that it no longer
meets specifications.
・This product is not designed to be entirely water- or dust-proof. To avoid
damage, do not use it in a wet or dusty environment.
WARNIN
G
Before turning the product on, make sure the source voltage matches
that indicated on the product’s power connector. Connection to an
improper supply voltage may damage the product and present an
electrical hazard.
Before making connections, make sure the 9439 DC POWER ADAPTER
is turned off. The 8835-01 could be damaged by a spark if it is
connected to a voltage source while its power supply is on.
WARNIN
G
To avoid electric shock and ensure safe operation, connect the power
cable to a grounded (3-contact) outlet.
N
otes on Use
Follow these precautions to ensure safe operation and to obtain the full
benefits of the various functions.
(1) Installation environment
(2) Power supply connections
・Check that the power supply is correct for the rating of the unit. (The AC
fuse is integrated in the unit.)
・The AC power power switch on 8835-01 is for AC power. If DC power is
being supplied and the switch on DC power adapter is set to ON, the 8835-
01 will operate also if the power switch is set to OFF.
(3) Grounding the unit