Hioki 8835-01 - Setting the Output Destination by the PRINT Key

231
────────────────────────────────────────────────────
9.6 Interface Settings (Media Settings)
────────────────────────────────────────────────────
9
.6.2 Setting the Output Destination by the PRINT Key
NOTE
NOTE
The measurement data output destination when the PRINT key is pressed is
specified.
Method Screen: SYSTEM 4 (INTERFACE)
: Output to internal printer.
: Output to external printer.
: Print data is automatically transferred to
the data collection server on the LAN (when
connected to a LAN).
The 9559 Printer Card is required to print on
an external printer. See Section 10.7.8.
When the external printer is the output destination, select the control code.
: Uses ESC/P as the control code.
: Uses ESC/P raster as the control code.
When the external printer is the output destination, select the color of the
output destination.
: Output color data.
: Output monochrome data.
Select the printing size.
: Print normal size.
: Print at 1.5 times magnification.
・Even if the information that has been input using the PRINT key is to be
output to the external printer, automatic printing or real-time printing is
performed on the internal printer rather than the external printer.
・Refer to printer manual for control code selections.