0.7.6 List Print (All Functions)
NOTE
The display contents of the STATUS screen, CHANNEL screen, DISPLAY
screen, SYSTEM screen, and FILE screen can be printed as is.
Method
1. Call up the desired screen.
2. Press the
COPY key.
・The screen hard copy function is not available during measurement.
・The following four types of copy output destination are available.
Internal printer: Built-in printer
FD: Data are stored on floppy disk.
PC: Data are stored on PC card.
Communication: Data are sent using the interface.
See Section 9.6.1.
The settings for the various functions made with the STATUS screen,
CHANNEL screen etc. can be printed in list format.
Method Screen: Respective function setting screen, except DISPLAY screen
While the setting screen (STATUS, CHANNEL, SYSTEM) is displayed, press
the
PRINT key.
・The list to be printed contains the setup conditions for the acquired
waveforms. Even if the settings are changed following wave acquisition, the
contents of the list remain unchanged.
・Only data entered in channel of the list is in analog waveform.
To Next Page
Loading...
