Hioki 8835-01 - Title Comment Input

223
────────────────────────────────────────────────────
9.5 Adding Comments to a Graph [ COMMENT ]
────────────────────────────────────────────────────
9
.5.1 Title Comment Input
NOTE
・Title comment input is described.
・Three types of title comment are available.
1. SET: Function, time axis range, magnification/compression ratio along the
time axis, date and time of trigger
2. COMMENT: Comment of up to 40 characters
3. SET & COMMENT: Both 1 and 2
Method Screen: SYSTEM 3 (COMMENT)
1. Press the SYSTEM key to call up the
COMMENT screen.
2. Move the flashing cursor to the position
shown in the figure on the left.
3. Use the function keys to make the selection.
: Standard printout is performed.
: Setting item is printed.
: Comment is printed.
: Both item and comment are printed.
4. When the flashing cursor is moved with the
CURSOR keys, the following function key
indication appears.
: Display the comment input window.
: Clear the currently displayed comments.
For details on comment input, see Section
9.5.5.
When "COMMENT" or "SET & COMMENT" is
selected, the comments are printed for the
report print (see Section 10.7.7).
The printer-recording format is set to numeric,
and setting items are not printed.