Hioki 8835-01 - Measurement Start and Stop Procedures

38
────────────────────────────────────────────────────
3.1 Basic Operation
────────────────────────────────────────────────────
3
.1.4 Measurement Start and End
START ke
y
STOP ke
y
LED
3
.1.5 Basic Input Operation
CH SELECT ke
y
TIME/DIV ke
y
POSITION key
s
INPUT RANGE key
s
Measure
Press the START key and the LED lights.
Stop measurement
Press the STOP key and the LED goes out after measurement has finished.
INPUT RANGE key
Serves to set the voltage axis range for each channel.
POSITION key
Serves to set the zero position for each channel.
CH SELECT key
Serves to set selected channel window.
TIME/DIV key
Serves to set the input signal capture speed (how many seconds, minutes,
hours for 1 DIV on the time axis).