Hioki 8835-01 - Setting the Frequency

103
────────────────────────────────────────────────────
6.2 Making Settings
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
6
.2.3 Setting the Frequency
Serves to set the frequency of the signal to be measured.
Method
1. Press the STATUS key to call up the
STATUS 1 screen.
2. Move the flashing cursor to the frequency
item, as shown in the figure on the left.
3. Use the function keys to make the selection.
: Measure rms value of 50 Hz signal
: Measure rms value of 60 Hz signal