Hioki 8835-01 - Setting for Measuring Voltage

159
────────────────────────────────────────────────────
7.9 Making the Settings of the 8947 CHARGE UNIT
────────────────────────────────────────────────────
7
.9.3 Setting for Measuring Voltage
Setting the Measurement Mode
Method Screen: CHANNEL 1
1. Call up the CHANNEL 1 screen.
2. Use the
JOG control or the function keys to
select Voltage.
: Move the cursor up in the selection window.
: Move the cursor down in the selection
window.
Setting the Anti-aliasing Filter
・Set an antialiasing filter designed to prevent aliasing distortion.
・The cutoff frequency of the filter is set automatically, according to the
frequency range and time axis range settings (see Section 7.5.2).
Method Screen: CHANNEL 1, DISPLAY
1. Move the flashing cursor to the point shown
in the figure on the left.
2. Use the function keys to make the selection.
: Anti-aliasing filter is disabled.
: Anti-aliasing filter is enabled.
For the other settings, see Section 7.3.