Hioki 8835-01 - Settings for Temperature Measurement

110
────────────────────────────────────────────────────
6.2 Making Settings
────────────────────────────────────────────────────
6
.2.7 Setting the Additional Recording Function
Additional recording OFF Additional recording ON
1. Recording 20 divisions of waveform 1. Recording 20 divisions of waveform
20 division
s
2000 division
s
20 division
s
2000 division
s
2. Recording another 20 divisions of
waveform
2. Recording another 20 divisions of
waveform
T
he first set of measurement data is discarded,
a
nd recording of the second set of measuremen
t
d
ata starts again from the beginning of memory
.
20 division
s
The first set of measurement data is preserved
,
and recording of the second set of measureme
nt
data starts after the first set.
20 divisions 20 divisions
T
he first and second sets of waveforms can be
o
bserved by scrolling or printing the waveform.
・This records, regarding the memory as though it were recording paper.
・The last 2000 divisions of waveform can be held in memory.
・The waveform can be scrolled and printed.
Switching the additional recording on and off affects the use of memory as
shown below.