Hioki 8835-01 - Adding Comment to Printout

251
────────────────────────────────────────────────────
10.6 Adding Comment to Printout
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
0.6 Adding Comment to Printout
Two types of comment are available.
(1) Title comment input
Title comments of up to 40 characters can be included on the recording paper.
If "COMMENT" or "SET & COMMENT" is selected, this title comment will be
included on the recording paper in all functions.
(2) Input of comments for each channel
Comments of up to 40 characters can be included on the recording paper on
each channel.
If "COMMENT" or "SET & COMMENT" is selected, this comment will be
included on the recording paper in all functions.
Method Screen: SYSTEM 3 (COMMENT)
1. Press the SYSTEM key to call up the
COMMENT screen.
2. Move the flashing cursor to the position
shown in the figure on the left.
3. Use the function keys to make the selection.
: Standard printout is performed.
: Setting item is printed.
: Comment is printed.
: Both item and comment are printed.
4. When [ COMMENT ] or [ SET&CMT ] is selected,
enter the comment.
Only the comment is entered for each logic
channel.
For details, see Section 9.5.