Hioki 8835-01 - Logic Probes

324
────────────────────────────────────────────────────
15.1 Logic Inputs
────────────────────────────────────────────────────
1
5.1.1 Logic Probes
DANGE
R
The 8835-01 has separate inputs for four probes, but the ground lines of
these inputs are not isolated from each other and from the frame ground
of the unit (common ground). If voltages with different ground levels are
input, probe short-circuiting may occur and lead to accidents.
NOTE
IC clip leads
(Digital input
)
Alligator clip lead
s
(Contact input)
■9320 LOGIC PROBE
Input can be swithced between voltage input and contact input. Suitable for a
wide range of applications, from checking electronic circuits to measuring
relay timing.
･ Carefully read the documentation supplied with the 9320.
･ The 9306-01 (discontinued) can also be used. Carefully read the documentation
supplied with the 9306-01.