Hioki 8835-01 - Zero Adjustment Procedure

104
────────────────────────────────────────────────────
6.2 Making Settings
────────────────────────────────────────────────────
6
.2.4 Setting the Recording Length
Shows the measurement time in the se
t
time axis range and recording length.
NOTE
・The length of recording for one measurement operation (number of DIV) can
be set.
・Two types of recording length can be set.
Fixed recording length mode:
Any recording length mode: Any recording length can be selected by the user.
Method 1 (Fixed recording length mode)
Screen: STATUS 1, DISPLAY
1. Call up the STATUS 1 or DISPLAY screen.
2. Move the flashing cursor to the shot item, as
shown in the figure on the left.
3. Use the
JOG control or the function keys to
make the selection.
: Move the cursor up in the selection window.
: Move the cursor down in the selection
window.
: Set the fixed recording length mode.
: Set the any recording length mode.
On the DISPLAY screen, the selection window
is not displayed.