Hioki 8835-01 - Manual Trigger; Trigger Output Connector

200
────────────────────────────────────────────────────
8.10 Manual Trigger
────────────────────────────────────────────────────
NOTE
NOTE
Trigger output connecto
r
8
.10 Manual Trigger
8
.11 Trigger Output Connector
Triggering occurs when the MANU TRIG key is pressed.
The manual trigger is always activated when the
MANU TRIG key is pressed,
regardless of other trigger source setting.
: Manual trigger is disabled.
: Manual trigger is enabled.
・When triggering occurs, a signal is output from the TRIG OUT connector.
・This can be used to synchronize several 8835-01 units.
・For details, see Section 12.6.
Pressing the
and cursor keys simultaneously to use the auto ranging
function causes a trigger signal to be output. Care is therefore required when
using the auto ranging function when the trigger output connector is in use.
(Only a memory recorder function)