241
────────────────────────────────────────────────────
9.7 Initialization [ INITIALIZE ]
────────────────────────────────────────────────────
.7.3 System Reset [ SYSTEM RESET ]
NOTE
・Resets all settings other than communication-related settings (GP-IB, RS-
232C, LAN) to the factory default values.
・The same effect can be achieved by turning power to the unit on while holding
down the
STOP key.
Method Screen: SYSTEM 5 (INITIALIZE)
1. Press the SYSTEM key to call up the
INITIALIZE screen.
2. Move the flashing cursor to the (3) SYSTEM
RESET item, as shown in the figure on the
left, and make the setting.
3. Press
F1 [exec].
To reset all settings, including communication-related settings, to the factory
default values, turn the power on while simultaneously pressing the START
and
STOP keys.
To Next Page
Loading...
