Hioki 8835-01 - Moving to the Analog Channel Comment Input Screen or the Logic Channel Comment Input Screen

225
────────────────────────────────────────────────────
9.5 Adding Comments to a Graph [ COMMENT ]
────────────────────────────────────────────────────
9
.5.3 Moving to the Analog Channel Comment Input Screen or
the Logic Channel Comment Input Screen
Method
1. Move the flashing cursor to the position
shown in the figure on the left.
2. Use the function keys to make the
selection.
: Move to the analog channel comment
input screen.
: Move to the logic channel comment input
screen.