Hioki 8835-01 - Logic Channel Comment Input

226
────────────────────────────────────────────────────
9.5 Adding Comments to a Graph [ COMMENT ]
────────────────────────────────────────────────────
9
.5.4 Logic Channel Comment Input
・Logic channel comment input is described.
・One type of logic channel comment is available.
COMMENT
Comments can be entered separately for every channel.
Method Screen: SYSTEM 3 (COMMENT)
1. Press the SYSTEM key to call up the
COMMENT screen.
2. Call up the logic channel comment input
screen
3. Move the flashing cursor to the position
shown in the figure on the left.
4. Use the function keys to make the selection.
: Standard printout is performed.
: Comment is printed.
5. When the flashing cursor is moved with the
CURSOR keys, the following function key
indication appears.
: Display the comment input window.
: Clear the currently displayed comments.
For details on comment input, see Section
9.5.5.