Hioki 8835-01 - Conversion Ratio Scaling

212
────────────────────────────────────────────────────
9.4 Scaling Function [ SCALING ]
────────────────────────────────────────────────────
9
.4.1 Conversion Ratio Scaling
Conversion is performed using the
incline (conversion ratio) and offset
value.
EU
Ｖ
Scaling is performed by specifying a physical quantity to correspond to a 1V
input signal (conversion ratio: EU/V), an offset value, and the unit (EU:
Engineering Units). This will cause the measurement voltage to be converted
into the selected units.
The setting can be made in two ways.