.3.9 Setting the Display Colors
NOTE
・Serves to set the display color.
・The display color can be selected from among the display colors 1 to 8 and the
customer color 9 which can be set as desired.
Method Screen: SYSTEM 1 (SETUP)
1. Press the SYSTEM key to call up the SET
UP screen.
2. Move the flashing cursor to the position
shown in the figure on the left.
3. Use the function keys to make the selection.
: Display color number up
: Display color number down
: Call up the custom setting screen
Custom setting (setting the color as desired)
1. Change the R.G.B. setting values of each
item on the screen.
2. Move the flashing cursor to the item for
which you want to change the setting values,
and use the
JOG control or the function keys
to make the settings.
3. The setting values inside the window applies
to the colors of the particular window.
When a value is changed, the color of the
area corresponding to this item changes.
: Value up
: Value down
: Exit from the custom setting screen
・When system reset is executed, set colors are initialized and become the
same color as that of display color 1.
・Only one customer color type can be set as desired.
To Next Page
Loading...
