Hioki 8835-01 - Setting the Printer Format

89
────────────────────────────────────────────────────
5.2 Making Settings
────────────────────────────────────────────────────
5
.2.5 Setting the Printer Format
NOTE
・Selects whether waveform data are printed as waveform or as numeric data.
・When numeric data are selected, the print interval also must be set.
Printing as a waveform
Method
1. Press the STATUS key to call up the STATUS
1 screen.
2. Move the flashing cursor to the print mode
item, as shown in the figure on the left
3. Use the function keys to select waveform.
: Waveform data are printed as a waveform.
: Waveform data are printed as numeric data.
In the recorder, the trigger mark is written as the start position mark. In an
additional recording (see Section 5.2.6), the trigger mark is displayed in front
of the most recently entered data.