Hioki 8835-01 - Page 110

88
────────────────────────────────────────────────────
5.2 Making Settings
────────────────────────────────────────────────────
NOTE
Continuous X-Y plot
・Setting the display format to X-Y allows X-Y waveforms to be combined
continuously.
・Selecting the X-Y display format changes the setting screen as shown in the
figure below.
1. Use the function keys to select the display
format.
: Single
: Dual
: Quad
: XY (dot)
: XY (line)
2. Select whether or not to clear any existing X-Y
plot.
: Do not clear the display window. The new
recording is overlayed the existing one.
: Clear the display window.
3. Press the CHAN key to call up the CHANNEL
1 screen.
4. Specify the X-axis channel.
Move the cursor to the channel to be used as X
axis, as shown at left.
Use the function keys to select X axis.
The remaining channel automatically becomes
the Y-axis input.
X-Y waveforms in the recorder function cannot be
saved in TEXT format. Also, the waveforms
cannot be saved automatically.