316
────────────────────────────────────────────────────
14.8 Advanced Version
────────────────────────────────────────────────────
Measurement functions Recorder & Memory (real time recording & high-speed data saving)
FFT (frequency analysis)
Computation functions (memory recorder function)
Waveform processing
calculations
Arithmetic operations, absolute value, exponents, common logarithms
square roots, moving average, 1st and 2nd derivatives, 1st and 2nd
integrals, time axis parallel shift
Averaging function Memory recorder function: Additive averaging (2, 4, 8 to 256 samples)
FFT function: Simple averaging, exponential averaging, peak hold (2,
4, 8 to 4096 samples)
Waveform decision (memory recorder function)
Waveform area decision Waveform decision based on reference area for Y-T waveform, X-Y
waveform, or FFT results
Decision modes Out: fail if any part of waveform is outside reference area
All out: fail if whole of waveform is outside reference area
Stop conditions GO (pass) stop, NG (fail) stop, GO & NG stop
Printer output or waveform save at stop
Decision output GO and NG outputs on side panel: open collector outputs (with 5 V
output, active low, pulse width 10 ms min.)
Waveform parameter
decision
Decision based on setting minimum and maximum values for
waveform parameter calculation results
Graphics editor Provided, used for defining an arbitrary reference area for waveform
decisions
Editor commands Paint, parallel shift, lines, eraser, loading waveform, reverse, screen
clear, delete within area, cancel, save new area, close editor
Memory segmentation
Memory segmentation
function
Memory can be segmented among channels.
Number of segments Maximum 255
Multi-block
Sequential saving
Waveform parameter
calculations
Average value, effective value, peak-to-peak value, maximum value,
time to maximum value, minimum value, time to minimum value,
period, frequency, rise time, fall time, area value, XY area value,
standard deviation
To Next Page
Loading...
