.5.2 Analog Channel Comment Input
NOTE
・Analog channel comment input is described.
・Three types of analog channel comment are available.
1. SET: Full-span voltage for each channel, voltage axis range,
magnification/compression ratio along the voltage axis, zero position,
low-pass filter setting
2. COMMENT: Comment of up to 40 characters
3. SET & COMMENT: Both 1 and 2
Method Screen: SYSTEM 3 (COMMENT)
1. Press the SYSTEM key to call up the
COMMENT screen.
2. Move the flashing cursor to the position
shown in the figure on the left.
3. Use the function keys to make the selection.
: Standard printout is performed.
: Setting item is printed.
: Comment is printed.
: Both item and comment are printed.
4. When the flashing cursor is moved with the
CURSOR keys, the following function key
indication appears.
: Display the comment input window.
: Clear the currently displayed comments.
For details on comment input, see Section 9.5.5.
When "COMMENT" or "SET & COMMENT" is
selected, the comments are printed for the report
print (see Section 10.7.7).
The printer-recording format is set to numeric,
and setting items are not printed.
To Next Page
Loading...
