Hioki 8835-01 - Waveform Parameter Processing Overview; Waveform Parameter Processing Functions

68
────────────────────────────────────────────────────
4.4 Processing Functions (Waveform Parameter Processing)
────────────────────────────────────────────────────
4
.4.1 Summary of the Processing Functions
Average value Period
Effective value (RMS) Frequency
Peak to peak value Rise time
Maximum value Fall time
Time to maximum value Standard deviatio
n
Minimum value Area value
Time to minimum value XY area
1
8
2
3
4
5
6
7
9
10
11
12
13
14
4
.4 Processing Functions (Waveform Parameter
Processing)
・The function is available only when using the memory recorder function.
・The following 14 processing functions are available for the captured waveform
data.
・Processing results are shown in numerical form.
・If the A/B cursors are turned off, processing is carried out for all data.
・If the A/B cursors are used, processing is carried out for data between the A/B
cursors.
・If only the A cursor is used, processing is carried out for data after the A
cursor.