Hioki 8835-01 - Initializing (Formatting) the Floppy Disk

280
────────────────────────────────────────────────────
13.2 Handling the Floppy Disk
────────────────────────────────────────────────────
1
3.2.3 Initializing (Formatting) the Floppy Disk
The floppy disk must be initialized (formatted) before using it.
The floppy disk initialization (formatting) method is described below.
Method
1. Press the FILE key to call up the FILE
screen. Move the flashing cursor to the
position shown in the figure on the left, and
use the function keys to select FD.
2. Use the CURSOR keys to move the flashing
cursor to the position shown in the figure on
the left.
3. Use the function keys to select FORMAT.
4. The format modes appear on the function key
display.
Use the function keys to select the floppy
disk format mode.
: Format in 2DD (720 KB) format.
: Format in 2HD (1.2 MB) format.
: Format in 2HD (1.44 MB) format.