Hioki 8835-01 - Selecting Waveform or Numeric Print

246
────────────────────────────────────────────────────
10.2 Selecting Waveform or Numeric Print
────────────────────────────────────────────────────
Waveform
Numeri
c
1
0.2 Selecting Waveform or Numeric Print
・This item lets the user select waveform or numeric print.
・Making this setting is required for manual print, auto print, real-time print,
and partial print.
Waveform print
Method Screen: STATUS 1 in each function
1. Press the STATUS key to call up the
STATUS 1 screen.
2. Move the flashing cursor to the print mode
item, as shown in the figure on the left.
3. Use the function keys to select waveform.
: Perform waveform print
: Perform numeric print
4. In the memory recorder function, the
smooth print function can be set. Use the
function keys to make the selection.
: Smooth printing is disabled.
: Smooth printing is enabled.