Hioki 8835-01 - Printer Check; Display Check

243
────────────────────────────────────────────────────
9.8 Self Check
────────────────────────────────────────────────────
9
.8.2 Printer Check
NOTE
9
.8.3 Display Check
・This test checks the printer operation.
・The printer head is cleaned.
Method Screen: SYSTEM 6 (SELF CHECK)
1. Move the flashing cursor to the position
shown in the figure on the left.
2. Use the function keys to make the
selection.
: Ckeck the printer operation.
: Clean the printer head.
Hold down this key for approx. 5 seconds.
To cancel the test pattern printout, press the
STOP key.
・This test checks the display.
・Two check patterns (solid-color display check
(*1)
and gradation check
(*2)
) are
available.
*1: Solid-color display check
Display solid red, green, blue, black, and white screens, respectively.
*2: Gradation check
Display the gradated colors red, green, and blue, respectively.
Method Screen: SYSTEM 6 (SELF CHECK)
1. Move the flashing cursor to the position
shown in the figure on the left.
2. Press F1 [exec] to check the display.
3. Press any key to move to the next check.