Hioki 8835-01 - Storing, Retrieving and Deleting Data on the Floppy Disk or PC Card; Overview; FILE Screen; What Can be Recorded and How Much

286
────────────────────────────────────────────────────
13.4 Storing, Retrieving and Deleting Data on the Floppy Disk or PC Card
────────────────────────────────────────────────────
1
3.4.1 Overview
1
3.4.2 FILE Screen
Press the FILE key to call up the FILE screen
.
Use the function keys to select the floppy disk or PC card
.
Select the command
.
Execut
e
1
3.4.3 What Can Be Recorded and How Much
Size of recording for the
setting state
Normal 512 bytes × 24 ＝ 12288 bytes
Advanced version
(After the 9540-01 FUNCTION
UP DISK is installed)
512 bytes × 28 ＝ 14336 bytes
1
3.4 Storing, Retrieving and Deleting Data on the Flopp
y
Disk or PC Card
This section explains how to use the SAVE, LOAD, INFO, and DELETE
commands and how to create, change, and delete a directory.
・The FILE screen appears when the
FILE key is pressed.
・The general operation flow is shown below.
(1) Setting state (FUNCTION)
1. It is possible to record the setting state for each of the functions: the
memory recorder function, the recorder function, and the RMS recorder
function.
2. When a setting state is read into the 8835-01, it is restored in the unit.
Size of recording in each function