.2 Basic and Advanced Versions
This section explains the features of the basic version and the advanced
version. It is possible to upgrade the basic version to the advanced version,
using the feature upgrade disk available as an option.
The following features and functions can be added to the basic version.
Measurement functions
Measurement functions are listed in the table below.
The basic version incorporates the "memory recorder function", "recorder
function", and "RMS recorder function". In addition to these functions, the
advanced version incorporates "recorder & memory" and the "FFT function".
Computation functions
Waveform processing calculation:
Arithmetic operations, absolute value, exponents, common logarithms, moving
average, 1st and 2nd derivatives, 1st and 2nd integrals, time axis parallel
shift
Averaging function:
Additive averaging, exponential averaging (2, 4, 8 to 256 samples) (memory
recorder)
Simple averaging, exponential averaging, peak hold (2, 4, 8 to 4096 samples)
(FFT)
Waveform decision function
Waveform area decision:
Waveform decision based on reference area for Y-T waveform, X-Y waveform,
or FFT results
Waveform parameter decision:
Decision based on setting minimum and maximum values for waveform
parameter calculation results
To Next Page
Loading...
