Hioki 8835-01 - External Trigger Function Usage

177
────────────────────────────────────────────────────
8.6 Using the Analog Trigger Function
────────────────────────────────────────────────────
Functio
n
Trigger
Memory
recorder
Recorder RMS
recorder
Level
Yes Yes No
Window
Yes Yes No
Voltage drop
Yes No No
Period
Yes Yes No
RMS level
No No Yes
8
.6 Using the Analog Trigger Function
・The analog signal input channels can be used as trigger source.
・The type of trigger that can be used for the various functions is limited.
Available trigger types for each function
Method Screen: STATUS 2, DISPLAY 0-06
1. Call up the STATUS 2 or DISPLAY screen.
2. Move the flashing cursor to the point shown
in the figure on the left.
3. Use the function keys to select the trigger
type.
Changing the analog channel on the
DISPLAY screen