Hioki 8835-01 - Setting for Measuring Pulse Duty Ratio

148
────────────────────────────────────────────────────
7.7 Making the Settings of the 8940 F/V UNIT
────────────────────────────────────────────────────
7
.7.4 Setting for Measuring Pulse Duty Ratio
NOTE
Setting the Measurement Mode
Method Screen: CHANNEL 1
1. Call up the CHANNEL 1 screen.
2. Move the flashing cursor to the unit item.
3. Use the
JOG control or the function keys to
select DUTY.
: Move the cursor up in the selection window.
: Move the cursor down in the selection
window.
: Probe check is performed.
For the probe check, see Section 7.7.5.
Setting the Pull-Up Resistance
See Section 7.7.2.
Setting the Threshold Value
See Section 7.7.2.