Hioki 8835-01 - Trigger Functions; Chapter 8 Trigger Functions; Overview of Trigger Functions

147
────────────────────────────────────────────────────
7.7 Making the Settings of the 8940 F/V UNIT
────────────────────────────────────────────────────
Setting the Measurement Range
・Set the measurement range.
・For count mode, the unit of measurement is ’c’ (counts).
Method Screen: CHANNEL 1, DISPLAY
1. Call up the CHANNEL 1 or DISPLAY screen.
2. Move the flashing cursor to the range item.
3. Use the function keys, the jog control or the
RANGE key to make the selection.
: Move the cursor up in the selection window.
: Move the cursor down in the selection
window.
Setting the Pull-Up Resistance
See Section 7.7.2.
Setting the Threshold Value
See Section 7.7.2.