Hioki 8835-01 - Page 37

15
────────────────────────────────────────────────────
2.2 Power Supply and Ground Connection
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
WARNIN
G
Make sure that the AC power switch of the 8835-01 is set to OFF.
AC power connector
AC power switch
Rated voltage:
100 - 120 V AC / 200 - 240 V AC
Rated line frequency:
50/60 Hz
Connecting the unit to a power supply and grounding it:
(1) AC power supply
1. Verify that the AC power switch of the 8845 is set to OFF.
2. Plug the grounded three-core power cord supplied into the AC power connector
on the right side of the 8835-01.
3. Plug the power cord into an AC outlet corresponding to the rating of the 8835-
01.