54
────────────────────────────────────────────────────
4.2 Making Settings
────────────────────────────────────────────────────
NOTE
NOTE
・Depending on the number of channels, the
recording length is limited (see Section 14.3).
(For setting the number of channels, see
Section 9.3.1.)
・On the DISPLAY screen, the selection window
is not displayed.
Method 2 (Any recording length mode)
Screen: STATUS 1, DISPLAY
1. Call up the STATUS 1 or DISPLAY screen.
2. Move the flashing cursor to the shot item, as
shown in the figure on the left.
3. Set the any recording length mode.
4. Use the
JOG control or the function keys to
make the selection. Use the cursor keys to
change the column.
: Value up
: Value down
: Set the fixed recording length mode.
: Set the any recording length mode.
On the DISPLAY screen, the setting cannot be
made with the
JOG control.
To Next Page
Loading...
