26 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Overview of Remote Control
LAN Remote Control System
2-
Step 3. The Add Interface/Device window appears. Select Interface Type as TCPIP
and press OK. The Instrument Properties window will then appear.
Make the settings as follows:
Name: SICL_LAN (you can specify any name), Interface: TCPIP,
Board Number: 0, and VISA Address: TCPIP::192.168.1.101::inst0::INSTR.
Figure 2-3 shows an example of control using the direct I/O interface that has
been set in the above procedure.
Figure 2-3 Example of control using Keysight VEE
To Next Page
Loading...
