Keysight E4981A - Page 311

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 311
Command Reference
SCPI Command Table
Display ON/OFF :DISPlay[:WINDow][:STATe] on page 215
Fixed point display
setup
ON/OFF :DISPlay[:WINDow]:TEXT1[:DATA]:FMSD[:STATe]
on page 217,
:DISPlay[:WINDow]:TEXT2[:DATA]:FMSD[:STATe]
on page 219
value of the highest digit :DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA on
page 216,
:DISPlay[:WINDow]:TEXT2[:DATA]:FMSD:DATA on
page 218
Deviation
measurement
mode setup
Primary
parameter
ON/OFF :CALCulate1:MATH:STATe on page 190
Mode :CALCulate1:MATH:EXPRession:NAME on page 189
Setup :CALCulate1:MATH:EXPRession:CATalog? on
page 189
Secondary
parameter
ON/OFF :CALCulate2:MATH:STATe on page 193
Mode :CALCulate2:MATH:EXPRession:NAME on page 192
Setup :CALCulate2:MATH:EXPRession:CATalog? on
page 192
Reference value :DATA:REFerence1:DATA on page 206,
:DATA:REFerence2:DATA on page 207, :DATA[:DATA]
on page 208, :DATA:REFerence1:FILL on page 207,
:DATA:REFerence2:FILL on page 208
Setup of displayed page :DISPlay:PAGE on page 213
Reset of displayed error/message :DISPlay:CCLear on page 212
Input the comment lines :DISPlay:LINE on page 212
Output the displayed image to controller :HCOPy:SDUMp:DATA? on page 226
Contact Check ON/OFF [:SENSe][:FIMPedance]:CONTact1:VERify[:STATe
] on page 260
Threshold TH1 [:SENSe][:FIMPedance]:CONTact1:VERify:THResh
old1 on page 261
TH2 [:SENSe][:FIMPedance]:CONTact1:VERify:THResh
old2 on page 262
Data buffer Data readout [:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:D
ATA? on page 253,
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:D
ATA? on page 256, :FORMat:STATus:EXTension on
page 224
Table 10-1 SCPI command table
Function Item to Be Set Up/Executed SCPI Command