Keysight E4981A - Page 348

348 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Information for Replacing 4268A, 4288A with E4981A
4268, 4288A vs. E4981A SCPI Command Correspondence Table
-
Display ON/OFF :DISPlay[:WIN
Dow][:STATe]
]]
Number of Digits setup NA :DISPlay[:WI
NDow]:TEXT
1[:DATA]:DIG
it
:DISPlay[:WI
NDow]:TEXT
1[:DATA]:DIG
it
This fnction is
not available in
E4981A.
Fixed point display
setup
ON/OFF :DISPlay[:WIN
Dow]:TEXT[1-
2][:DATA]:FMS
D[:STATe]
NA :DISP:WIN:T
EXT1:FMSD
value of the highest digit :DISPlay[:WIN
Dow]:TEXT[1-
2][:DATA]:FMS
D:DATA
NA :DISP:WIN:T
EXT1:FMSD:
DATA
Deviation
measurement mode
setup
Primary
parameter
ON/OFF :CALCulate1:M
ATH:STATe
]]
Mode :CALCulate1:M
ATH:EXPRessi
on:NAME
]]
Setup :CALCulate1:M
ATH:EXPRessi
on:CATalog?
]]
Secondary
parameter
ON/OFF :CALCulate2:M
ATH:STATe
]]
Mode :CALCulate1:M
ATH:EXPRessi
on:NAME
]]
Setup :CALCulate1:M
ATH:EXPRessi
on:CATalog?
]]
Reference value :DATA:REFeren
ce[1-2]:DATA
NA NA
:DATA[:DATA]
? ?REF1|REF2}
]]
:DATA:REFeren
ce[1-2]:FILL
NA NA
Setup of displayed page :DISPlay:PAGE :DISPlay[:WI
Ndow]:TEXT
2:PAGE
]
Reset of displayed error/message :DISPlay:CCLe
ar
NA NA
Input the comment lines :DISPlay:LINE NA NA
Output the displayed image to controller :HCOPy:SDUM
p:DATA?
NA NA
Contact Check ON/OFF [:SENSe][:FIM
Pedance]:CON
Tact1:VERify[:
STATe]
] NA
Table B-1 At-a-glance SCPI command correspondence between 4268A, 4288A, and E4981A (by function)
Function Item to Be Set Up/Executed SCPI Command Note
E4981A 4268A 4288A