Keysight E4981A - Page 349

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 349
Information for Replacing 4268A, 4288A with E4981A
4268, 4288A vs. E4981A SCPI Command Correspondence Table
Contact Check Threshold TH1 [:SENSe][:FIM
Pedance]:CON
Tact1:VERify:T
HReshold1
NA NA
TH2 [:SENSe][:FIM
Pedance]:CON
Tact1:VERify:T
HReshold2
NA NA
Data buffer Data readout [:SENSe][:FIM
Pedance]:CON
Tact1:VERify:B
UF1:DATA?
NA NA
[:SENSe][:FIM
Pedance]:CON
Tact1:VERify:B
UF2:DATA?
NA NA
:FORMat:STAT
us:EXTension
NA NA
Data buffer setup Feeding target parameter [:SENSe][:FIM
Pedance]:CON
Tact1:VERify:B
UF1:FEED:CON
Trol:INTerval
NA NA
[:SENSe][:FIM
Pedance]:CON
Tact1:VERify:B
UF2:FEED:CON
Trol:INTerval
NA NA
Control (feed/not feed) [:SENSe][:FIM
Pedance]:CON
Tact1:VERify:B
UF1:FEED:CON
Trol[:STATe]
NA NA
[:SENSe][:FIM
Pedance]:CON
Tact1:VERify:B
UF1:FEED:CON
Trol[:STATe]
NA NA
Buffer size [:SENSe][:FIM
Pedance]:CON
Tact1:VERify:B
UF1:POINts
NA NA
Contact Check Data buffer setup Buffer size [:SENSe][:FIM
Pedance]:CON
Tact1:VERify:B
UF2:POINts
NA NA
Key lock ON/OFF :SYSTem:KLOC
k
]]
Table B-1 At-a-glance SCPI command correspondence between 4268A, 4288A, and E4981A (by function)
Function Item to Be Set Up/Executed SCPI Command Note
E4981A 4268A 4288A