Clearing the Dynamic Address Table
◆
Life Time – Shows the time to retain the specified address.
Web Interface
To show the dynamic address table:
1.
Click MAC Address, Dynamic.
2.
Select Show Dynamic MAC from the Action list.
3.
Select the Sort Key (MAC Address, VLAN, or Interface).
4.
Enter the search parameters (MAC Address, VLAN, or Interface).
5.
Click Query.
Figure 92: Displaying the Dynamic MAC Address Table
Clearing the Dynamic Address Table
Use the MAC Address > Dynamic (Clear Dynamic MAC) page to remove any learned
entries from the forwarding database.
Parameters
These parameters are displayed:
◆
Clear by – All entries can be cleared; or you can clear the entries for a specific
MAC address, all the entries in a VLAN, or all the entries associated with a port
or trunk.
To Next Page
Loading...
