LevelOne GEL-5261 - Main Menu

Chapter 2 | Using the Web Interface
Navigating the Web Browser Interface
– 47 –
Main Menu Using the onboard web agent, you can define system parameters, manage and
control the switch, and all its ports, or monitor network conditions. The following
table briefly describes the selections available from this program.
Table 4: Switch Main Menu
Dashboard Displays system information, CPU utilization, temperature, and top 5 44
most active interfaces.
System
General Provides basic system description, including contact information 64
Switch Shows the number of ports, hardware version, power status, and
firmware version numbers
Capability Enables support for jumbo frames;
shows the bridge extension parameters
65
66,
67
File 69
Copy Allows the transfer and copying files 69
Automatic Operation Code Upgrade Automatically upgrades operation code if a newer version is 73
found on the server
Set Startup Sets the startup file 72
Show Shows the files stored in flash memory; allows deletion of files 73
Time 77
Configure General
Manual
Manually sets the current time
78
SNTP
Configures SNTP polling interval
79
NTP
Configures NTP authentication parameters
79
Configure Time Server
Configures a list of SNTP servers
80
Configure SNTP Server
Sets the IP address for SNTP time servers
80
Add NTP Server
Adds NTP time server and index of authentication key
81
Show NTP Server
Shows list of configured NTP time servers
81
Add NTP Authentication Key
Adds key index and corresponding MD5 key
83
Show NTP Authentication Key
Shows list of configured authentication keys
83
Configure Time Zone
Sets the local time zone for the system clock
84
Configure Summer Time
Configures summer time settings
85
Console
Sets console port connection parameters
87
Telnet
Sets Telnet connection parameters
89
CPU Utilization
Displays information on CPU utilization
90
CPU Guard
Sets the CPU utilization watermark and threshold
91
Memory Status
Shows memory utilization parameters
92
Menu Description Page