Basic Management Tasks
This chapter describes the following topics:
◆
Displaying System Information – Provides basic system description, including
contact information.
◆
Displaying Hardware/Software Versions – Shows the hardware version, power
status, and firmware versions
◆
Configuring Support for Jumbo Frames – Enables support for jumbo frames.
◆
Displaying Bridge Extension Capabilities – Shows the bridge extension
parameters.
◆
Managing System Files – Describes how to upgrade operating software or
configuration files, and set the system start-up files.
◆
Setting the System Clock – Sets the current time manually or through specified
NTP or SNTP servers.
◆
Configuring the Console Port – Sets console port connection parameters.
◆
Configuring Telnet Settings – Sets Telnet connection parameters.
◆
Displaying CPU Utilization – Displays information on CPU utilization.
◆
Configuring CPU Guard – Sets thresholds in terms of CPU usage time and
number of packets processed per second.
◆
Displaying Memory Utilization – Shows memory utilization parameters.
◆
Resetting the System – Restarts the switch immediately, at a specified time,
after a specified delay, or at a periodic interval.
To Next Page