LevelOne GEL-5261 - Figure 320: Dropping MLD Query Packets

– 487 –
Chapter 14 | Multicast Filtering
Filtering MLD Query Packets on an Interface
This feature can be used to drop any query packets received on the specified
interface. If this switch is acting as a Querier, this prevents it from being affected
by messages received from another Querier.
Web Interface
To drop IGMP query packets:
1. Click Multicast, MLD Snooping, Query Drop.
2. Select Port or Trunk interface.
3. Enable query drop for any interface.
4. Click Apply.
Figure 320: Dropping MLD Query Packets