Displaying
ARP Inspection
Statistics
Use the Security > ARP Inspection (Show Information - Show Statistics) page to
display statistics about the number of ARP packets processed, or dropped for
various reasons.
Parameters
These parameters are displayed:
Table 18: ARP Inspection Statistics
Received ARP packets before
ARP inspection rate limit
Dropped ARP packets in the
process of ARP inspection rate
limit
ARP packets dropped by
additional validation (IP)
ARP packets dropped by
additional validation (Dst-MAC)
Total ARP packets processed by
ARP inspection
ARP packets dropped by
additional validation (Src-MAC)
ARP packets dropped by ARP
ACLs
ARP packets dropped by DHCP
snooping
Count of ARP packets received but not exceeding the ARP
Inspection rate limit.
Count of ARP packets exceeding (and dropped by) ARP rate
limiting.
Count of ARP packets that failed the IP address test.
Count of packets that failed the destination MAC address test.
Count of all ARP packets processed by the ARP Inspection engine.
Count of packets that failed the source MAC address test.
Count of ARP packets that failed validation against ARP ACL rules.
Count of packets that failed validation against the DHCP Snooping
Binding database.
Web Interface
To display statistics for ARP Inspection:
1.
Click Security, ARP Inspection.
2.
Select Show Information from the Step list.
3.
Select Show Statistics from the Action list.
To Next Page
Loading...
