Displaying Hardware/Software Versions
Use the System > Switch page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the
system.
Parameters
The following parameters are displayed:
Main Board Information
◆
Serial Number – The serial number of the switch.
◆
Number of Ports
– Number of built-in ports.
◆
Hardware Version – Hardware version of the main board.
◆
Main Power Status – Displays the status of the internal power supply.
Management Software Information
◆
Role – Shows that this switch is operating as Master or Slave.
◆
Loader Version – Version number of loader code.
◆
Linux Kernel Version
– Version number of Linux kernel.
◆
Operation Code Version
– Version number of runtime code.
◆
Thermal Detector – Thermal detector is near the back of the unit.
◆
Temperature – Temperature at specified thermal detection point.
To Next Page
Loading...
