LevelOne GEL-5261 - Showing the MTU for Responding Destinations; Figure 340: Showing Reported MTU Values; Table 33: Show MTU - Display Description

Chapter 16 | IP Configuration
Setting the Switch’s IP Address (IP Version 6)
– 520 –
Showing the MTU
for Responding
Destinations
Use the IP > IPv6 Configuration (Show MTU) page to display the maximum
transmission unit (MTU) cache for destinations that have returned an ICMP packet-
too-big message along with an acceptable MTU to this switch.
Parameters
These parameters are displayed:
Table 33: Show MTU - display description
MTU Adjusted MTU contained in the ICMP packet-too-big message returned from this
destination, and now used for all traffic sent along this path.
Since Time since an ICMP packet-too-big message was received from this destination.
Destination
Address
Address which sent an ICMP packet-too-big message.
Web Interface
To show the MTU reported from other devices:
1. Click IP, IPv6 Configuration.
2. Select Show MTU from the Action list.
Figure 340: Showing Reported MTU Values
Field Description