Parameters
These parameters are displayed:
Configure Method
◆
Authorization Type – Specifies the service as:
■
Command – Administrative authorization to apply to commands entered
at specific CLI privilege levels.
■
Exec – Administrative authorization for local console, Telnet, or SSH
connections.
◆
Method Name – Specifies an authorization method for service requests. The
“default” method is used for a requested service if no other methods have been
defined. (Range: 1-64 characters)
◆
Server Group Name - Specifies the authorization server group.
(Range: 1-64 characters)
The group name “tacacs+” specifies all configured TACACS+ hosts (see
“Configuring Local/Remote Logon Authentication” on page 237). Any other
group name refers to a server group configured on the TACACS+ Group
Settings page. Authorization is only supported for TACACS+ servers.
Configure Service
◆
Authorization Type – Specifies the service as Exec, indicating administrative
authorization for local console, Telnet, or SSH connections.
◆
Console Method Name – Specifies a user defined method name to apply to
console connections.
◆
VTY Method Name – Specifies a user defined method name to apply to Telnet
and SSH connections.
Show Information
◆
Authorization Type
- Displays the authorization service.
◆
Method Name - Displays the user-defined or default accounting method.
◆
Server Group Name - Displays the authorization server group.
◆
Interface - Displays the console or Telnet interface to which these rules apply.
(This field is null if the authorization method and associated server group has
not been assigned to an interface.)
To Next Page
Loading...
