■
AuthPriv – SNMP communications use both authentication and
encryption.
◆
Authentication Protocol – The method used for user authentication.
(Options: MD5, SHA; Default: MD5)
◆
Authentication Password – A minimum of eight plain text characters is
required. (Range: 8-32 characters)
◆
Privacy Protocol – The encryption algorithm use for data privacy; only 56-bit
DES is currently available.
◆
Privacy Password – A minimum of eight plain text characters is required.
Web Interface
To configure a local SNMPv3 user:
1.
Click Administration, SNMP.
2.
Select Configure User from the Step list.
3.
Select Add SNMPv3 Local User from the Action list.
4.
Enter a name and assign it to a group. If the security model is set to SNMPv3
and the security level is authNoPriv or authPriv, then an authentication
protocol and password must be specified. If the security level is authPriv, a
privacy password must also be specified.
5.
Click Apply
To Next Page
Loading...
