LevelOne GEL-5261 - Page 476

Chapter 14 | Multicast Filtering
MLD Snooping (Snooping and Query for IPv6)
– 476 –
■
Other Expire – Time after which remote querier is assumed to have
expired.
■
Self Addr – IPv6 address of local querier on this interface.
■
Self Expire – Time after which local querier is assumed to have expired.
■
Self Uptime – Time local querier has been up.
■
Transmit
■
General – The number of general queries sent from this interface.
■
Group Specific – The number of group specific queries sent from this
interface.
■
Receive
■
General – The number of general queries received on this interface.
■
Group Specific – The number of group specific queries received on this
interface.
◆ Report & Leave
■
Host Addr – The link-local or global IPv6 address that is assigned on that
VLAN.
■
Unsolicit Expire – The number of group leaves resulting from timeouts
instead of explicit leave messages.
Clear
Parameters
These parameters are displayed:
◆ All – Clears statistics for all MLD messages.
◆ VLAN – VLAN identifier. (Range: 1-4094)
◆ Unit – Stack unit. (Range: 1)
◆ Port – Port identifier. (Range: 1-52)
◆ Trunk – Trunk identifier. (Range: 1-8)