Chapter 2
|
Using the Web Interface
Navigating the Web Browser Interface
Table 4: Switch Main Menu (Continued)
Shows all configured alarms
Shows all configured events
Configure Interface
Add
transmit control frames, specifies the interval to wait before releasing
loopback, and traps to send
Tools
Ping Sends ICMP echo request packets to another node on the network 463
Periodically samples statistics on a physical interface
Enables collection of statistics on a physical interface
Shows sampling parameters for each entry in the history group
Shows sampling parameters for each entry in the statistics group
Shows sampled data for each entry in the history group
Shows sampled data for each entry in the history group
Configures the time to apply an ACL
Specifies the name of a time range
Shows the name of configured time ranges
Sets exact time or time range
Shows the time specified by a rule
Ethernet Ring Protection Switching
Shows list of configured ERPS rings, status, and settings
Configures ring parameters
Blocks a ring port using Forced Switch or Manual Switch
commands
Enables loopback detection globally, specifies the interval at which to
an interface from shutdown state, specifies response to detect
Enables loopback detection per interface
To Next Page
Loading...
