Matrix Telecom ETERNITY NE - Page 1285

Matrix ETERNITY NE System Manual 1275
• Consumed SMS (Daily): This shows the number of SMS of the allotted Daily SMS Budget that has
been used up on the Mobile port.
• Budget Reset Mode: This shows if you have enabled Scheduled Reset for the SMS budget.
• SMS Budget Reset Schedule (Date): This shows the date on which the SMS Budget will be reset.
• Reset Consumed Budget: This editable field allows the you to reset the consumed SMS Budget,
manually. It will reset both Consumed SMS (Total) and Consumed SMS (Daily).
The Consumed SMS Budget can be reset from the System Engineer mode as well as the System
Administrator mode manually at any time or on a scheduled date from the System Administrator mode
only. Refer to “Resetting SMS Budget”.
ASR/ACD
.
• Call Duration: This is the total call duration of matured outgoing calls
166
on the Mobile port. This data
is used for calculating Answer Seizure Ratio (ASR) for the port. It is displayed in MMMMMM:SS format
• Dialed Calls: This is the total number of outgoing calls
167
made from the Mobile port. This data is used
for calculating Answer Seizure Ratio (ASR) for the port.
• Successful Calls: This is the total number of matured outgoing calls made from the Mobile port. This
data is used for calculating Answer Seizure Ratio (ASR) and Average Call Duration for the port.
• ASR: This is the Answer Seizure Ratio (ASR) calculated by the system for the Mobile port, in terms of
percentage. ASR is the sum of all outgoing matured calls from the Mobile port, divided by the total
number of outgoing calls made from the Mobile port, multiplied by 100. The system calculates ASR
after the completion of the outgoing call.
• ACD: This is the Average Call Duration (ACD) of outgoing calls made from the Mobile port. It is an
indicator for monitoring the network condition. Decreasing ACD is indicative of trouble in the network
condition.
The system calculates ACD after the completion of the outgoing calls, by dividing the total call duration
by the number of outgoing matured calls.
• Reset ASR and ACD: This field allows the System Engineer to reset manually the ASR and the ACD
of the Mobile port.
The parameters Total Call duration, Number of matured calls, Total Number of OG Calls, ASR and ACD
are saved in the configuration, and are not reset on Power OFF condition. The system maintains the
statistics for the last 999 calls. When the total number of outgoing calls exceeds 999, the system will
stop calculating ACD and ASR and will display ASR and ACD calculated on the basis of the last 999
calls only.
Therefore, the System Engineer must manually reset ASR and ACD when the total number of calls
reaches 999. When you reset ASR and ACD the number of call matured and the number of calls dialed
is reset to 0.
166. Matured calls are outgoing calls for which 'CONNECT' message was received from the network.
167. The total number of outgoing calls made includes the number of times the ATD has been sent from the Mobile port to the network.