124 Matrix ETERNITY NE System Manual
• Low Power Mode: SARVAM UCS supports Low Power Mode option, using which the SLT instruments will
consume less power in the On-Hook state. You may disable this check box, if required. Default: Enabled.
SARVAM UCS also supports Thermal Shutdown. That is, the SLT instrument will stop functioning if the
thermal temperature of the SLIC increases above the threshold level. To indicate the thermal shutdown,
the respective SLT Port number will appear red in the “Extension and Feature Codes” page of the Jeeves.
You must restart the system to resume functioning of the phone.
• Gain Settings: Configure the following Transmit and Receive Gain Settings.
• SLT - System (Tx-Gain and Rx-Gain): Configure the Gain Settings that you want the system to apply
on the SLT port with respect to the system (for example Call Conference). These will not be applicable
for any other port type. Valid Range for Tx Gain: +6dB to -12dB and Rx Gain +6dB to -12dB. Default: 0
dB
• SLT- Voice Mail (Tx-Gain and Rx-Gain): Configure the Gain Setting that you want the system to apply
on the SLT port when the SLT user is accessing the Voice Mail System. Valid Range for Tx Gain: +6dB
to -12dB and Rx Gain +6dB to -12dB. Default: 0 dB
• SLT - Voice Module (Tx-Gain and Rx-Gain): Configure the Gain Settings that you want the system to
apply on the SLT port when the system plays Voice Module to the SLT user. Valid Range for Tx Gain:
+6dB to -12dB and Rx Gain +6dB to -12dB. Default: 0 dB
• SLT - Call Progress Tones (Tx-Gain and Rx-Gain): Configure the Gain Setting that you want the
system to apply on the SLT port while playing Call Progress Tones. Valid Range for Tx Gain: +6dB to -
12dB and Rx Gain +6dB to -12dB. Default: 0 dB
• SLT - SLT (Tx-Gain and Rx-Gain): Configure the Gain Setting that you want the system to apply on
the SLT when the FXS Port is connected to any other FXS Port of the system during an incoming or
outgoing call. Valid Range for Tx Gain: +6dB to -12dB and Rx Gain +6dB to -12dB. Default: 0 dB.
• SLT - CO (Tx-Gain and Rx-Gain): Configure the Gain setting that you want the system to apply on the
SLT when the FXS Port is connected to CO Port of the system during an incoming or outgoing call.
Valid Range for Tx Gain: +6dB to -12dB and Rx Gain +6dB to -12dB. Default: 0 dB.
• SLT - SIP (Tx-Gain and Rx-Gain): Configure the Gain Setting that you want the system to apply on the
SLT when the FXS Port is connected to any SIP Trunk or SIP Extension of the system during an
incoming or outgoing call. Valid Range for Tx Gain: +6dB to -12dB and Rx Gain +6dB to -12dB.
Default: 0 dB.
• SLT - Mobile (Tx-Gain and Rx-Gain): Configure the Gain Setting that you want the system to apply on
the SLT when the FXS Port is connected to any Mobile Port of the system during an incoming or
outgoing call. Valid Range for Tx Gain: +6dB to -12dB and Rx Gain +6dB to -12dB. Default: 0 dB.
• Click Submit.
To Next Page
Loading...
