Matrix ETERNITY NE System Manual 157
• Select the type of Alarm Notification Type the system should use when user answers Alarm Call. Your
options are:
• Voice Message: The extension user is played a message recorded in the Voice Module on answering
the alarm call.
• Music-on-Hold: The extension user is played music-on-hold on answering the alarm call.
• Voice Mail: The extension user is greeted by the VMS on answering the alarm call.
• Routing Group: The alarm call is routed to the group of desired extensions configured as the
Operator, so that the alarm request can be served. See “Operator” for instructions.
Default: Voice Message.
COSEC Door Group
You must assign the extension user to a COSEC Door Group for COSEC Integration. The users in the same group
must be assigned the same group. You can create as many as 50 groups numbered from 00 to 50. Users who are
assigned COSEC Door Group ‘00’ are not a part of any group. See “COSEC Integration” for more information.
Station Type
• If this is an Operator extension and you want the system to play beeps during a conference to the
participants, to indicate the presence or absence of the Operator, select the Station Type as Assistant.
If this is not an Operator extension, select the Station Type for the SIP Extension as Administration.
Ringer LED
This parameter decides whether the Ringer LED should glow or not on the desired extensions for incoming calls
36
and as missed call notification
37
.
• By default, this check box is selected, that is, the LED will continue to blink until the missed call log is read
or the call is answered/disconnected. Disable this check box if you do not want the Ringer LED to glow.
Help Desk
Configure this parameter if you want to define the extension as a “Help Desk”.
• Select the Assign Help Desk function to this Extension check box. Default: Disabled.
Forced Account Code
Configure this parameter, if you want to apply the feature Forced Account Code on the extension. When Forced
Account code is enabled, the system will allow the extension user to dial an external number only after the user has
entered the Account Code. To know more, see “Account Codes”.
• Select the check box Do not allow Outgoing Calls without Account Code (Force Account Code).
• Click Submit.
36. Applicable only for SPARSH VP310 AND SPARSH VP510.
37. Applicable only for SPARSH VP510.
To Next Page
Loading...
